Plan a pilot box
Menu

Photo, negative and glass plate scanning

Prints and cabinet cards captured front and back, and film and glass captured with light passing through them, to a specification you approve before we start.

Photographs carry information on both sides. The front shows who and where; the back often says who it was, in pencil, and the mount names the studio and the town. Negatives and glass plates may hold images nobody has seen as a print for a century. We capture all of it: prints from the front and back, film and glass with light passing through them, and the sleeves and envelopes that came with them.

What we capture

  • Prints and mounted photographs: cabinet cards, cartes de visite, snapshots, enlargements and photographs in albums.
  • Film negatives: roll film and sheet film, black-and-white and color.
  • Slides and transparencies: mounted slides and larger color transparencies.
  • Glass plate negatives: including cracked or broken plates, captured in supported positions.
  • Lantern slides: positive images on glass, made for projection.

Reflective and transmissive capture

A print is a reflective original: light falls on its surface and bounces back to the camera. Film and glass are transmissive: the image is read by light passing through them, so they are captured on an even, calibrated light source. The FADGI Technical Guidelines (third edition, 2023) set separate categories, and the sampling frequency is measured on the original, which is why small film needs far higher numbers than a print:

Original FADGI category Three-star Four-star
Prints and photographs 3.8 400 ppi 600 ppi
Transparencies, 35mm up to 4x5 in 3.9 3,000 ppi 4,000 ppi
Negatives, 35mm up to 4x5 in 3.11 3,000 ppi 4,000 ppi
Negatives, 4x5 in and larger 3.12 1,500 ppi 2,000 ppi

We assign glass plate negatives and lantern slides to the negative or transparency category that matches their size, and the specification records which one. FADGI asks for master files of prints in 16-bit color at or above three-star, even from black-and-white originals, because tone and surface differences are part of a photograph’s character. Glass may hold a print flat only when it will not harm it, and tightly curled prints are never forced flat. As with every capture service, the star level is the one agreed in writing and checked against targets each session.

Glass, nitrate and acetate

Glass plates are handled by their edges, with gloves, and kept upright in padded slots between sessions, never stacked flat. Cracked plates are supported on a sheet so the pieces stay in register, and flaking emulsion is noted before the plate is moved. Film is handled with gloves and touched only outside the image area. Following the National Archives’ guidance, we do not clean film with water-based solutions or other chemicals, and we do not write on sheet film.

Two film bases need decisions before anything moves. Cellulose nitrate film can pose a serious fire risk when stored improperly, and the National Archives advises separating it from other records; it may be marked “NITRATE” along the edge or identified by a notch, but date alone is not a reliable guide. Cellulose acetate film is prone to an acidic decay called vinegar syndrome, named for its smell; film that smells of vinegar, curls or shrinks is kept apart and flagged as a priority for capture. If you have or suspect either, tell us before packing. Whether nitrate is imaged at our studio or on site is decided for each collection and agreed in writing. The collection care page and the condition assessment checklist explain how to spot them.

Negatives become positives, and both are kept

FADGI recommends scanning a negative as if it were a transparency, keeping highlights and shadows unclipped, and saving that image as the archival master. A positive is then made from it by inverting the image and adjusting it, a step the guidelines compare to printing in a darkroom: it depends on the technician’s judgment. For color negatives the guidelines warn that inversion and color correction cannot show exactly how the image would have looked printed in its own era. So we keep the negative master untouched and deliver the positive as a separate production file, with the adjustments noted in the capture log. Anyone can make a different positive later from the same master.

Backs, mounts and sleeves

Where a back carries writing, stamps or a studio imprint, we capture it as a second image and link the pair by file name. Mounts stay in the frame, because the mount style helps date the photograph. Album pages are captured whole, then each photograph on them. Negative sleeves and plate boxes often carry the only caption, so they are captured too, and the inscriptions go to text recognition and then to AI-assisted cataloging, where a person checks the names.

Example (fictional). Cabinet card ACHS-3-C04 from the Aster County Historical Society’s Box 3 shows two girls in matching dresses. The mount front reads “Halvorsen Studio, Wren Gulch, Colo.” and the back carries a pencil note, “Ida and Marit”. Front and back are captured under FADGI category 3.8 at three-star, 400 ppi, as ACHS-3-C04_front and ACHS-3-C04_back. A cataloger confirms the names Ida and Marit Okerlund and dates the card to about 1895 from the mount style.

What you receive

  • Preservation masters in TIFF: prints as captured, negatives as captured negatives.
  • Positive production files and access copies for negatives, plus JPEG access copies for everything.
  • Linked front and back images with a naming scheme agreed with you.
  • A capture log with the category, star level, resolution and target results per session, and condition notes made during capture.

To see what these resolutions mean in pixels and megabytes, try the scanning resolution calculator. Photographs in a box of papers can go through the same pilot as the letters, alongside document scanning.

Send one box first.

A pilot box shows you the images, the recognized text and the catalog records before you commit a whole collection. Tell us what is in the box and what you want people to find.

Plan a pilot box of photographs

Studio and contacts

24 South Weber Street, Suite 225
Colorado Springs, CO 80903
(719) 244-8450sales@dastok.com